Scanner quick reference
For sonographers and nurses. Print this page and keep it by the scanner: the site navigation is left off the printout.
Your clinic's scanners must already be connected and have passed a test scan (see the clinic setup guide). If they have not, scans will not reach wawa however carefully you follow it.
Every scan, every scanner
- Choose the patient from the worklist. Never type their details by hand: the worklist entry carries the wawa ID that puts the scan on the right record. If someone is missing, refresh the worklist.
- Scan and measure as usual. For follicles, set left or right before measuring each ovary.
- Send the images.
- Send the measurements.
- End the exam.
| Images | Measurements | |
|---|---|---|
| Skipped? | The scan shows in wawa with measurements but no images | The scan shows in wawa with images but Measurements pending |
Both sends, every scan.
GE Voluson P8
| Step | On the P8 |
|---|---|
| Worklist | Patient key, then the Worklist tab. Choose the patient and Start Exam |
| Send the images | Press P1 once all the images are captured |
| Send the measurements | Open Measurements and press Transfer Data (bottom left of the window) |
| Finish | End Exam |
GE Voluson Performance and Swift
These follow the same two sends as the P8, but wawa has not verified their controls, and they depend on the model, software version and how your supplier set the scanner up:
- Images are usually sent with P1, if your supplier set it to send to the imaging server.
- Measurements may be sent from the report screen, or automatically at End Exam if the scanner is set to.
Fill in your scanner's controls after your go-live test scan, not before:
| Our scanner (model and room): ______________________ | |
|---|---|
| Send the images with | |
| Send the measurements with |
Any other scanner
The same two sends are needed on every make and model; only the buttons differ. wawa does not publish model-specific steps beyond the P8, so ask your scanner supplier which controls send each one, and write them in the box above. For GE ViewPoint, see ViewPoint.
Check it in wawa
Open the patient, then Records → Ultrasound. Scans arrive within a few minutes; to bring them across now, click Fetch Scanner Reports. Images can take up to an hour to show. Measurements come into wawa for follicle-tracking and pregnancy scans only; any other scan shows its images and stays Measurements pending.
Quick fixes
| What you see | Most likely | What to do |
|---|---|---|
| Patient missing from the worklist | Not booked as an ultrasound, or booked for another room | Refresh the worklist; check the booking's appointment type and room. Still missing? Tell your wawa administrator |
| Measurements but no images, on every scan from this scanner | The image key does not send to wawa's imaging server: unset, or still pointing at an old system | Not something a sonographer can fix: tell whoever looks after the scanners to check P1 in Button Configuration |
| Measurements but no images, on some scans | The image send was missed | Re-send the exam from the scanner's archive with P1, and tell wawa the date |
| Measurements showing, images not yet | Images are downloaded in the background and can take up to an hour | Wait before re-sending. Still missing after an hour? See the rows above |
| Images showing, Measurements pending | The measurement send was missed | Send the measurements, then Fetch Scanner Reports. Still pending? Tell wawa |
| Nothing in wawa at all | Nothing was sent, or the patient was typed by hand | Send the images and the measurements, then Fetch Scanner Reports. If it was typed by hand, tell wawa |
Still stuck? Tell wawa the patient's wawa ID (not their name), the scan date and time, and the scanner or room.